The GrateFix is a simple method of securely fastening steel, aluminium and fiberglass grating to support steelwork. Using only an Allen Key to install, grating can be secured without welding or drilling. The GrateFix is designed to be installed from above the grating by one person. No access below the grating is required resulting in a quick and simple installation. The GrateFix consists of a stepped malleable iron bottom casting complete with screw and saddle clip bracket. All items are available galvanized or in grades 304 and 316 stainless steel.
Product code: GF3 S08 ASSY; Material/finish: 304 stainless steel; Screw diameter: M08; Body width (mm): 0.625; Tightening torque (Nm): 8
Product code: GF1 S10 ASSY; Material/finish: galvanised malleable iron; Screw diameter: M10; Body width (mm): 0.750; Tightening torque (Nm): 5
Lower the GrateFix through the open part of the grating, ensure the bracket is seated over the adjacent bearing bars.
Slide the GrateFix towards the supporting steelwork flange as far as it will go to ensure maximum clamping force.
Tighten the screw and ensure that the lower casting rotates until one of the steps locates on the bearing bar.
|For Use With||Clamp for Steel, Aluminum & Fiberglass Grating|